ENEN
All Categories

Valve Trim and Assembly parts

You Are Here : Home > Products > Valve Trim and Assembly parts

Customized Disc Valve Used In Coal Chemical Industry And Polysilicon Industry

Quick Details
  • Description
  • Inquiry

Customized Disc Valve Used In Coal Chemical Industry And Polysilicon Industry


Product introduction:

The disc valve is a quick-opening and quick-closing valve that realizes switching by sliding the disc. Its design is specifically for materials with abrasion and erosion characteristics. It can continuously and long-term under severe working conditions.

normal work. Its unique hard sealing surface has a self-grinding effect, so that it can continuously improve the sealing performance during the application process of abrasion and erosion materials, and its life span is several times longer than other valves. The department

Column valves are mainly used in coal chemical industry, polysilicon and other industries.

Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application

GradeWC%Co/Ni %Physical and mechanical propertiesGrain size (μm)Recommended application
Density (g/cm3)TRS (N/mm2)Hardness (HRA)
ZG01100015.3-15.5120095.50.3Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability
ZG04X96415.0-15.2160092.80.8-1.0Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts
ZG0694614.8-15.1250090.01.2Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure.
ZG06X94614.8-15.1240091.51.0Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance.
ZG06A94614.8-15.1215092.50.6-0.8
ZG0892814.6-14.9270089.01.2-1.6Good general performance, used for general wear parts, molds, general tools, etc.
ZG10.2901014.3-14.6380091.70.7Good general performance, suitable for casing and oil nozzle products
ZG11891114.3-14.7280088.51.2-1.6Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries.
ZG12X881214.2-14.5300089.51.0-1.2Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings.
ZG15851513.8-14.2300086.51.2-1.6
ZG15X851513.8-14.2450089.00.7Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc.
ZG20802013.4-13.8310085.01.0Excellent wear resistance and toughness
ZN0694614.5-14.9200090.01.2Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts.
ZN0991914.3-14.6230089.01.2-1.6
ZN11891114.0-14.3260088.01.2


Contact Us

Hot categories