PDC Cemented Tungsten Carbide Tc Thrust Radial Bearing for Drilling Mud Motor/Gas Oil Fieled
Quick Details
- Inquiry
Our PDC and TC (Tungsten carbide) Radial Bearing advatages are as the following:
1) Highly resistant to abrasion, erosion, corrosion, and mechanical failure
2) Extremely resistant to chipping, cracking, and flaking which are inherent problems in cladding or welded overlay processes
3) High heat conductivity eliminates thermal cracking
4) Proprietary design eliminates catastrophic downhole radial bearing failure
5) Carbide tile and matrix design ensures extended life compared to cladding or welded overlay designs
6) Inner and outer components can be reconditioned.
7) The hardness of body surface can reach 30-37 HRC.
Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application | |||||||
Grade | WC% | Co/Ni % | Physical and mechanical properties | Grain size (μm) | Recommended application | ||
Density (g/cm3) | TRS (N/mm2) | Hardness (HRA) | |||||
ZG01 | 100 | 0 | 15.3-15.5 | 1200 | 95.5 | 0.3 | Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability |
ZG04X | 96 | 4 | 15.0-15.2 | 1600 | 92.8 | 0.8-1.0 | Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts |
ZG06 | 94 | 6 | 14.8-15.1 | 2500 | 90.0 | 1.2 | Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure. |
ZG06X | 94 | 6 | 14.8-15.1 | 2400 | 91.5 | 1.0 | Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance. |
ZG06A | 94 | 6 | 14.8-15.1 | 2150 | 92.5 | 0.6-0.8 | |
ZG08 | 92 | 8 | 14.6-14.9 | 2700 | 89.0 | 1.2-1.6 | Good general performance, used for general wear parts, molds, general tools, etc. |
ZG10.2 | 90 | 10 | 14.3-14.6 | 3800 | 91.7 | 0.7 | Good general performance, suitable for casing and oil nozzle products |
ZG11 | 89 | 11 | 14.3-14.7 | 2800 | 88.5 | 1.2-1.6 | Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries. |
ZG12X | 88 | 12 | 14.2-14.5 | 3000 | 89.5 | 1.0-1.2 | Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings. |
ZG15 | 85 | 15 | 13.8-14.2 | 3000 | 86.5 | 1.2-1.6 | |
ZG15X | 85 | 15 | 13.8-14.2 | 4500 | 89.0 | 0.7 | Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc. |
ZG20 | 80 | 20 | 13.4-13.8 | 3100 | 85.0 | 1.0 | Excellent wear resistance and toughness |
ZN06 | 94 | 6 | 14.5-14.9 | 2000 | 90.0 | 1.2 | Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts. |
ZN09 | 91 | 9 | 14.3-14.6 | 2300 | 89.0 | 1.2-1.6 | |
ZN11 | 89 | 11 | 14.0-14.3 | 2600 | 88.0 | 1.2 |
Advantages:
Advanced process design
Specialized in production
Unique material properties
Personalized customization
Whole process quality control system
Strong supply ability guaranteed
Other categories
- Seat ring in Pump
- tungsten carbide shaft sleeve
- Choke Bean in Valve
- cemented carbide Wear Ring
- carbide nozzle
- tungsten carbide Seat
- wear-resisting parts MWD LWD
- Durable Plug in Valve
- cap nose tapered MWD LWD
- PDC thrust bearing for Pump
- Cage in Valve
- excellent quality Plug
- polishing Spray Nozzles
- Spray Sleeve in Pump
- Spray Nozzles
- Valve Core in Valve
- radial bearing
- Spray Choke Bean in Pump
- JET Nozzles for Drill bits
- tungsten carbide roll rings
- carbide thread nozzles
- Bearing for Oil Gas industry
- Wear Resistant Components
- tungsten carbide spray nozzles
- stainless steel bonded tungsten carbide choke stems and seats
- carbide valve part flow sleeve
- cemented carbide JET Nozzles
- wear plate manufacturers
- Choke Bean in Pump
- TC thrust bearing